Drop/Slide-Ins

General Description:
These units feature heavy-gauge steel exterior housing with individual thermostatic compartment controls, indicator lights and a master switch. Can be ordered with 1, 2, 3, 4, 5 or 6 wells.

Construction:

• 300 Series stainless steel top
• 576 aluminum spillage pan as standard

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Infinite switch heat controls
• Remote panel controls

Options:

• 3 Phase wiring
• 1000 watt elements (not available on 5- or 6-section units at 120 volts)

 

General Description:
Keep food cold with this counter top refrigerated platform. Available in lengths from 32″ to 88″.

Construction:

• Stainless steel top
• Steel exterior housing with drain

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Remote on/off switch
• 1″ brass drain & plug as well as the cord and plug all standard.
• Self-contained refrigeration
• 1″ above the counter top

Options:

• Remote (less compressor and housing) installation of mechanical units
• 220 VOLT – 50HZ COMPRESSOR
• Compressor moved to left end
• Condensate Evaporator

General Description:
Have the option of switching your unit from hot to cold, and back! These stainless steel units are insulated on all four sides and the bottom. The efficient electric immersion heaters meet NSF standard 4, and the self-contained refrigeration system meets NSF standard 7 operation, with one control switch to change from hot to cold operation.

Construction:

• Heavy gauge 300 series stainless steel
• 2 wells
• 10″ deep pan

Features:

• Immersion heaters meet NSF standard 4 & 7
• Self-contained system with R404A refrigerant
• Unit has single control switch to change from hot to cold operation

Electrical Spec:

• Warmer 208V/60Hz
• Refrigeration 120V/60Hz

 

General Description:
Choose from our wide range of 5″ and 8″ deep cold pans.Available in lenghts from 18″ to 88″.

Construction:

• 300 series stainless steel top rims and liners

Features:

• 1″ cast brass drain and plug
• Stainless steel liner
• Adapter bars for full size pans as standard

Options:

• False bottom -1/2″ (1.3 cm) deep-sectional
• Beaded 12-1/16″ x 20-1/16″ openings in top

General Description:
These units include copper coil refrigeration, 1″ cast brass drain, a remote mounted on/off switch, and feature a 5-year warranty on the compressor. Available in 5″ or 8″ deep models, available in lengths of 18 1/8″ to 88 1/8″.

Construction:

• 300 Series stainless steel top rims and liners

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Options:

• Remote (less compressor and housing) installation of mechanical units
• Stainless steel louvered grille – 12-1/2″ H x 17-1/16″ W and 3/4″ flanges
• 220 VOLT – 50 hZ compressor
• Compressor moved to left end
• Condensate evaporators

General Description:
NSF Standard 7 compliant units include copper coil refrigeration, 1″ cast brass drain, a remote mounted on/off switch, and feature a 5-year warranty on the compressor. Available in 8″ or 10″ deep models, in 18 1/18″ to 88 1/8″ lengths.

Construction:

• 300 Series stainless steel top rims and liners

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Options:

• Remote (less compressor and housing) installation of mechanical units
• Stainless steel louvered grille – 12-1/2″ H x 17-1/16″ W and 3/4″ flanges
• 220 VOLT – 50 hZ compressor
• Compressor moved to left end
• Condensate evaporator

General Description:
OUr sealed hot food wells are thermostatically controlled with drains and offer optional top-quality copper manifolds and brass master valves.master switch. Can be ordered with 1, 2, 3, 4, 5 or 6 wells.

Construction:

• 300 Series stainless steel top

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Infinite switch heat controls
• Individual controls in remote panels

Options:

• 3 Phase wiring
• Manifolds, copper tube
• Master valve, brass
• Individual valves, brass

Drop-in Exposed Element Electric
General Description:
These units feature heavy-gauge steel exterior housing with individual thermostatic compartment controls, indicator lights and a master switch. Can be ordered with 1, 2, 3, 4, 5 or 6 wells.

Construction:

• 300 Series stainless steel top
• 576 aluminum spillage pan as standard

Electric Spec:

• Available in 120, 208 and 240 volt
• Infinite switch heat controls
• Remote panel controls

Options:

• 3 Phase wiring
• 1000 watt elements (not available on 5- or 6-section units at 120 volts)

Drop-in Sealed Well Electric
General Description:
OUr sealed hot food wells are thermostatically controlled with drains and offer optional top-quality copper manifolds and brass master valves.master switch. Can be ordered with 1, 2, 3, 4, 5 or 6 wells.

Construction:

• 300 Series stainless steel top

Electric Spec:

• Available in 120, 208 and 240 volt
• Infinite switch heat controls
• Individual controls in remote panels

Options:

• 3 Phase wiring
• Manifolds, copper tube
• Master valve, brass
• Individual valves, brass

Drop-in Ice Cooled Cold Pan
General Description:
Choose from our wide range of 5″ and 8″ deep cold pans.Available in lenghts from 18″ to 88″.

Construction:

• 300 series stainless steel top rims and liners
• 1″ cast brass drain and plug
• Stainless steel liner
• Adapter bars for full size pans as standard

Options:

• False bottom -1/2″ (1.3 cm) deep-sectional
• Beaded 12-1/16″ x 20-1/16″ openings in top

Drop-in Mechanichally Assisted, Ice Cooled Cold Pan
General Description:
These units include copper coil refrigeration, 1″ cast brass drain, a remote mounted on/off switch, and feature a 5-year warranty on the compressor. Available in 5″ or 8″ deep models, available in lengths of 18 1/8″ to 88 1/8″.

Construction:

• 300 Series stainless steel top rims and liners

Options:

• Remote (less compressor and housing) installation of mechanical units
• Stainless steel louvered grille – 12-1/2″ H x 17-1/16″ W and 3/4″ flanges
• 220 VOLT – 50 hZ compressor
• Compressor moved to left end
• Condensate evaporator

Drop-in NSF7 Cold Pan
General Description:
NSF Standard 7 compliant units include copper coil refrigeration, 1″ cast brass drain, a remote mounted on/off switch, and feature a 5-year warranty on the compressor. Available in 8″ or 10″ deep models, in 18 1/18″ to 88 1/8″ lengths.

Construction:

• 300 Series stainless steel top rims and liners

Options:

• Remote (less compressor and housing) installation of mechanical units
• Stainless steel louvered grille – 12-1/2″ H x 17-1/16″ W and 3/4″ flanges
• 220 VOLT – 50 hZ compressor
• Compressor moved to left end
• Condensate evaporator

Drop-in Frost Top
General Description:
Keep food cold with this counter top refrigerated platform. Available in lengths from 32″ to 88″.

Construction:

• Stainless steel top
• Steel exterior housing with drain

Features:

• Remote on/off switch
• 1″ brass drain & plug as well as the cord and plug all standard.
• Self-contained refrigeration
• 1″ above the counter top

Options:

• Remote (less compressor and housing) installation of mechanical units
• 220 VOLT – 50HZ COMPRESSOR
• Compressor moved to left end
• Condensate Evaporator

Drop-in Hot-Cold Convertible
General Description:
Have the option of switching your unit from hot to cold, and back! These stainless steel units are insulated on all four sides and the bottom. The efficient electric immersion heaters meet NSF standard 4, and the self-contained refrigeration system meets NSF standard 7 operation, with one control switch to change from hot to cold operation.

Construction:

• Heavy gauge 300 series stainless steel
• 2 wells
• 10″ deep pan

Features:

• Immersion heaters meet NSF standard 4 & 7
• Self-contained system with R404A refrigerant
• Unit has single control switch to change from hot to cold operation

Electrical Spec:

• Warmer 208V/60Hz
• Refrigeration 120V/60Hz

General Description:
These units feature heavy-gauge steel exterior housing with individual thermostatic compartment controls, indicator lights and a master switch. Can be ordered with 1, 2, 3, 4, 5 or 6 wells.

Construction:

• 300 Series stainless steel top
• 576 aluminum spillage pan as standard

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Infinite switch heat controls

Options:

• 3 Phase wiring
• 1000 watt elements (not available on 5- or 6-section units at 120 volts)

 

General Description:
For those who prefer a less expensive alternative to electrically heated wells, we offer one to six-well models that utilize your choice of natural gas or propane.

Construction:

• 300 series stainless steel top rims
• With 576 spillage pans

Features:

• 1/2″ IPS gas connector
• Pressure regulator included

Options:

• Thermostat control, includes safety pilot
• Safety Pilot. ONLY

General Description:
These units feature heavy-gauge steel exterior housing with individual thermostatic compartment controls, indicator lights and a master switch. Can be ordered with 1, 2, 3, 4, 5 or 6 wells.

Construction:

• 300 Series stainless steel top
• Sealed stainless steel hot food wells

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Infinite switch heat controls

Options:

• 3 Phase wiring
• 1000 watt elements (not available on 5- or 6-section units at 120 volts)

 

General Description:
These sleeker versions of our full-sized Drop-In Exposed Element Hot Well units. Feature the same great performance of their full-sized counterparts but with a narrower, space-saving Slimline design. These units feature heavy-gauge steel exterior housing with individual thermostatic compartment controls, indicator lights and a master switch. Can be ordered with 1, 2, or 3 wells.

Construction:

• 300 Series stainless steel top
• 576 aluminum spillage pan as standard

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)
• Infinite switch heat controls
• Remote panel controls

Options:

• 3 Phase wiring
• Manifolds, copper tube
• Master valve, brass
• Individual valves, brass

 

General Description:
Choose from our wide range of 5″ and 8″ deep cold pans.Available in lenghts from 18″ to 88″.

Construction:

• 300 series stainless steel top rims and liners
• 1″ cast brass drain and plug
• Stainless steel liner
• Adapter bars for full size pans as standard

Options:

• Globe valve & drain line (for ice cooled drop-ins)

General Description:
These units include copper coil refrigeration, 1″ cast brass drain, a remote mounted on/off switch, and feature a 5-year warranty on the compressor. Available in 5″ or 8″ deep models. Available in lengths of 48 1/4″ to 70 1/4″.

Construction:

• 300 Series stainless steel top rims and liners

Options:

• Remote (less compressor and housing) installation of mechanical units
• Stainless steel louvered grille – 12-1/2″ H x 17-1/16″ W and 3/4″ flanges
• 220 VOLT – 50 hZ compressor
• Compressor moved to left end
• Condensate evaporator

General Description:
NSF Standard 7 compliant units include copper coil refrigeration, 1″ cast brass drain, a remote mounted on/off switch, and feature a 5-year warranty on the compressor. Available in 8″ or 10″ deep models, in 48 3/4″ to 70 3/4″ lengths.

Construction:

• 300 Series stainless steel top rims and liners

Options:

• 220 VOLT – 50 hZ compressor
• Condensate evaporator
• False bottom – 1/2″ (1.3 cm) deep-sectional – S/S

General Description:
These sleeker versions of our full-sized Drop-In Sealed Hot Well units. Feature the same great performance of their full-sized counterparts but with a narrower, space-saving Slimline design.
These units feature heavy-gauge steel exterior housing with individual thermostatic compartment controls, indicator lights and a master switch. Can be ordered with 1, 2, or 3 wells.

Construction:

• 300 Series stainless steel top

Electric Spec:

• Available in 120, 208 and 240 volt

Features:

• Infinite switch heat controls
• Remote panel controls

Options:

• 3 phase wiring (except ASI-1E)
• Manifolds, copper tube
• Master valve, brass
• Individual valves, brass

 

General Description:
These sleeker versions of our full-sized Slide-In or Drop-In Exposed Element Hot Well units feature the same great performance of their full-sized counterparts but with a narrower, space-saving Slimline design. Can be ordered with 1, 2 or 3 wells.

Construction:

• 300 Series stainless steel top
• 576 aluminum spillage pan as standard

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Individual compartment controls

Options:

• 3 phase wiring (except ASI-1E)
• Manifolds, copper tube
• Master valve, brass
• Individual valves, brass

Slimline Slide-in Sealed Well Electric

General Description:
These sleeker versions of our full-sized Slide-In Sealed Hot Well units feature the same great performance of their full-sized counterparts but with a narrower, space-saving Slimline design. Can be ordered with 1, 2 or 3 wells.

Construction:

• 300 Series stainless steel top
• Stainless steel liner

Electric Spec:

• Available in 120, 208 and 240 volt(120V is not available on 6 well units)

Features:

• Individual compartment controls

Options:

• 3 phase wiring (except ASI-1E)
• Manifolds, copper tube
• Master valve, brass
• Individual valves, brass